一、設備方面.由于斷橋鋁門窗設備分類眾多,每種設備可能都有好幾款機器.對于門窗設備的檢查尤為重要,比如切割鋸的氣管插頭、鋸片進出速度、鋸頭左右工作狀態等等.
One, equipment. Because of the large number of equipment classification of the broken bridge aluminum doors and windows, each kind of equipment may have several machines. It is particularly important for the inspection of the door and window equipment, such as the cutting plug of the cutting saw, the speed of the saw blade, the working state of the saw head and so on.
二、電力方面.由于斷橋鋁門窗設備常用電壓時380V的,所以大家在接線的時候一定要注意火線和零線的連接.這個一般來講,門窗設備廠家都會分出眼色,火線為黑色或者藍色,零線為紅色(各個工廠根據自己的情況而定).如果火線接反了,就在火線的兩端隨便倒換兩根即可.
Two, electric power. Because of the broken bridge aluminum door and window equipment commonly used voltage 380V, so we must pay attention to the connection of the fire line and zero line when the connection. Generally speaking, the door and window equipment manufacturers will distinguish the color, the fire line is black or blue, the zero line is red (depending on the condition of each factory). If the fire line is connected, You can change two at both ends of the fire line.

三、氣源方面.由于斷橋鋁門窗設備的壓料都是氣缸壓緊,因此保證充足的供氣量是設備高效使用的一個前提.如果,氣壓達不到,鋁型材雙頭切割鋸的鋸片進出就會受到影響,相應地加工效果也會受到影響.一般來講,一套斷橋鋁門窗設備要保證氣壓能夠達到8個壓,供氣流量達到0.3.如果設備過多,僅僅靠氣泵是不夠的,需要大家準備一兩個儲氣罐.

Three, gas source. Because the pressure of the equipment of the broken bridge aluminum door and window is all the cylinder pressure, so ensuring the sufficient supply is a prerequisite for the high efficient use of the equipment. If the pressure is not reached, the saw blade of the double head cutting saw will be affected and the corresponding processing effect will be affected. Generally speaking, a set of broken bridge aluminum doors and windows is set up. To ensure that the pressure can reach 8 pressure, the flow of gas reaches 0.3.. If the equipment is too large, it is not enough to rely solely on the air pump, so we need to prepare one or two gas storage tanks.
在對斷橋鋁門窗設備進行維護時,我們首先應根據斷橋鋁門窗設備說明書上所規定的技術要求性能、結構特點、操作使用規范、調整措施等,組織擬訂安全操作規程,同時向操作人員提出操作使用要求的規范,并組織學習,使他們能掌握、熟知操作使用設備的具體要求和有關規定.
In the maintenance of the equipment for the broken bridge aluminum doors and windows, we should first organize the safety operation regulations according to the technical requirements, structural features, operation usage specifications and adjustment measures, as stipulated in the aluminum door and window equipment specification of the broken bridge. At the same time, we should put forward the requirements and organize the learning to the operators. Grasp and familiarity with the specific requirements and relevant regulations for operation and use of equipment.
做到斷橋鋁門窗設備合理使用的基本條件是:按企業產品生產的工藝特點和實際需要配備設備,使其配套成龍,布局合理、協調.要考慮主要生產設備、輔助生產設備的成套性.不然,就會產生設備之間不相適應,造成生產安排不協調,影響正常生產進行.
The basic conditions for the rational use of the equipment for the broken bridge aluminum doors and windows are that the equipment is equipped according to the technological characteristics and actual needs of the products produced by the enterprise, so that the equipment will be set up and the layout is reasonable and coordinated. The main production equipment and the complete set of auxiliary production equipment should be considered. Otherwise, the production arrangements will not adapt, resulting in the disharmony of the production arrangement and the shadow of production. Sound normal production.
感謝您的閱讀，此文的文章來源：鋁切割設備更多的內容和問題請點擊：http://www.wngtshy.cn我們會繼續努力的為您提供服務，感謝您的支持！
Thank you for your reading, the source of this article: more aluminum cutting equipment and more questions please click: http://www.wngtshy.cn we will continue to work hard for you to provide service, thank you for your support!